Update 2019-05-02: For those of you who want to install macOS 10.14 on an unsupported Mac,check this post.
- How To Install Mavericks On Unsupported Macs
- Install Os X Mavericks On Unsupported Mac
- Install Mavericks On Unsupported Mac
Creating the installer. Prepare your USB as GUID partition map with a HFS+ partition. Mount your Mavericks DMG (Right click on “Install OS X 10.9 Developer Preview” then its in /Contents/Shared Support/InstallESD.dmg) 3. Mount BaseSystem.dmg by typing the following in terminal: open /Volumes/OS X Install ESD/BaseSystem.dmg. Attempting to install Catalina on an unsupported Mac is in no way supported by Apple, and you are doing so at your own risk. MacRumors cannot be held liable for any data loss or damage as a result. Install Mavericks on older Mac Pro 1,1 & 2,1 (2006/2007 gen) They done it, you can install Mac OS 10.9 Mavericks on first and second generation of Mac Pro! Important note, I am in no way responsible for this wonderful hack. All credit goes to user Tiamo on Macrumors forums, he accepts Paypal donations for everyone who would like to buy him a. Install Mavericks 10.9 to the system: Note that there are no USB 2.0 ports on the rear panel of the ECS motherboard. As needed add a header cable to bring out a USB 2.0 port to accept the USB installer device. As needed add the target hard drive to the system (and remove any other).
I have a MacBook Mid 2007 (more technically named MacBook2,1) that officially can not be upgraded beyond Mac OS X 10.7 (Lion). It is however possible to install Mac OS X 10.9 (Mavericks) on it with quite good success and not too much effort.
I want to first write what does not work:
- Sleep mode – not working at all – leave on or shut down
- The build-in web camera – “works” but not as it did in 10.7, I think
- YouTube-video (etc), works occationally (now worse than in 10.7, my experience)
I suggest you read the user comments to this post. A few helpful readers have shared their experiences.
What you need:
- A USB Memory, 8GB or larger
- Mac OS X Mavericks (i had the install/upgrade Application that I had myself
downloaded on another Mac, from App Store, when I upgraded it from 10.8 to
10.9. I always keep these for possible future use.) - SFOTT: I used version 1.4.4 which is currently the latest stable
- Audio/Video-drivers from (not here anymore, se comments below).
Warning, this is one of these horrible download pages where you don’t know
where to click to get the right thing, and what gives you spyware. You
should get the file mac-mini-mavericks.7z. Discard anything else without
opening. The 7z-file can be opened with StuffitExpander, that already
comes with Maverick
Making a bootable USB-drive
You first need to use SFOTT to create your bootable USB-drive (it is called “key” in SFOTT). You simply double-click on SFOTT on a Mac where you both have your Mavericks Install App and your USB-drive. SFOTT is a self guiding menu-driven application. It will take some time to make all the settings in SFOTT (it took me perhaps 15 minutes), but it was self-explanatory and not very difficult. Use the autorun mode to create the drive.
Recovery Scenario
When you install a Mac OS upgrade there is a risk your Mavericks system will not boot. When upgrading from 10.9.0 to 10.9.5 like I did, it will not boot. My impression (after reading different sources) is that this recovery is needed when upgrading from 10.9.0 (or 10.9.1 / 10.9.2) but not later. Nobody knows about 10.9.6 of course, because it is not out. Minor upgrades to applications or security upgrades should not cause need to recovery.
When Mavericks fails to start you need to “re-Patch” using SFOTT. I installed Mavericks on a separate partition, side-by-side with Lion, so when Mavericks failed to start my computer automatically started Lion instead and I could run SFOTT in Lion to re-Patch my Mavericks system.
If you can not do side-by-side you can start from your SFOTT-key (which you still have) and instead of installing Maverick you start the Terminal application. Find the SFOTT.app on the key, and find SFOTT.sh inside SFOTT.app. Run SFOTT.sh and you can re-Patch your broken Mavericks system. I did the entire procedure on my working Mavericks just to test it, and it seems fine.
There is if course no true guarantee that a future Apple upgrade will not break everything completely.
Installing Mavericks
Installation of Mavericks from the USB-drive is very standard. To start the computer from the USB-drive, hold down the “alt”-key (not Apple-key, not ctrl-key) while starting the computer. Choose SFOTT and proceed normally. After about an hour you should have a clean 10.9.0 Mavericks with network/wifi working. Video will work, but with problems (try Safari, and you will see), and Audio will not work.
Upgrade Mavericks
I used App Store to upgrade Mavericks to 10.9.5. That works just fine, until Mavericks fails to start (I ended up in my old Lion system on a reboot, if you have no other system installed your computer with probably just not start). This is where you need to recover your system using SFOTT.
Fixing Audio and Video
The 7z-file I referred to above contains Audio and Video drivers. You run the application “Kext Utility” and the you drag the contents of the folder Extensions into the Kext Utility, and it will install the drivers. There is a folder with “optional wifi drivers”, I have not installed those because wifi has been fine all the time for me.
The MacBook2,1 has Intel GMA950 Video, and there are no supported 64-bit-drivers for Mavericks. The drivers I suggest you to install are supposed to be drivers from a public beta of 10.6 (Snow Leopard) that Apple once released. They seem to work quite fine for me though. And not installing them is worse.
How To Install Mavericks On Unsupported Macs
I suggest you upgrade to 10.9.5 before fixing Audio and Video. I guess a later Apple-upgrade could break Audio and Video and require you to reinstall drivers.
Problems booting the SFOTT key
I first created the SFOTT key using the SFOTT beta (that is also supposed to work with Yosemite), and I used System Preferences/Startup Disk (in Lion) to start the installion. This failed and my computer just started up in Lion.
I then created the SFOTT key using 1.4.4, AND i restarted the computer holding down the alt-key. This worked. This key also later worked when I used System Preferences/Startup Disk (in Mavericks) to choose startup drive.
Driver Problems
There are open source Audio drivers called VoodooHDA. I installed those ones with success, but audio volume was low. I tried to fix with no success. Later I found the drivers I referred to above and that I recommend.
I found another download for what was supposed to be the same Video Drivers. But the Kext-utility did not work, and I installed the drivers by copying them directly into /System/Library/Extensions and this gave me a broken unbootable system. I don’t know what went wrong, but I recommend the drivers I linked to.
Video/YouTube Performance
Some videos seem to play perfectly, others dont. I had problems with 10.7 too.
Background and about SFOTT
There are several Apple computers that can run 10.7, that have a 64-bit processor, but that can not officially run 10.8 or later. There are a few issues:
- Video Drivers – and in the case of my MacBook2,1 the unofficial ones mentioned
above may be good enough - 32 bit EFI. Even though the computer has a 64 bit processor, the EFI, the
software that runs before the Installer/Operating system, is 32 bit, and not
capable of starting a 64-bit system. - Mavericks does not believe it can run on this hardware.
As I understand it SFOTT installs a little program that 32 bit EFI is capable of starting, and that in turn is capable of staring a 64 bit system. Also, SFOTT patches a few files so Mavericks feels comfortable running on the unsupported hardware.
You can do all of this on your own without SFOTT. SFOTT “just” makes this reasonably easy.
There are plenty of forums, tools and information about running Mac OS X on unsupported hardware (also non-Apple-hardware: a Hackintosh). Those forums of course focus a lot on problems people have.
Yosemite
It is supposed to be possible to install Yosemite in a similar way. SFOTT has a beta release for Yosemite. For my purposes going to Mavericks gave me virtually all advantages of an upgrade (supported version of OS X, able to install latest Xcode, etc).
Conclusion
In the beginning of 2015, it is not that hard to install Mavericks on a MacBook Mid 2007, with a quite good result. I have pointed out the tools and downloads you need and that will work.
See following:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store:Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Install Os X Mavericks On Unsupported Mac
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Install Mavericks On Unsupported Mac
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Sep 27, 2014 3:22 PM