Ford Sync 4.4

admin

It seems like the Ford Ranger was reintroduced only yesterday. But time flies and the 2022 Ford Ranger is already being redesigned to include some incredible upgrades. The Ranger is getting even better with upgrades that even go back to its roots.

  1. Ford Sync 4.4 Download
  2. Ford Sync My Ride
  3. Ford Sync Troubleshooting
  4. Ford Sync Problems

The 2022 Ford Ranger is getting fresh upgrades

The current Ranger returned in 2019, so the updates may feel a little fast. However, the Ranger has been available in other markets for the last decade. That’s why a refresh is already on the way.

On owner.ford.com it's telling me I have a Sync (non-MFT) update available for my 2014 Focus. I believe I'm at version 4.2.1, and from the file named in the download. 2015-20 Ford Mustang SYNC 3.4 4' to 8'SYNC3 conversion w/carplay android auto. Free shipping Free shipping Free shipping. 31 watchers 31 watchers 31.

According to Motor Authority, the 2022 Ford Ranger is getting a little bigger and smaller. New spy shots reveal that single and Super Cab versions are on the way. The Single Cab will really provide the Ranger with a nostalgic feel. Also, in some markets, an SUV body will be offered.

The 2022 Ranger is expected to borrow styling cues from the 2021 Ford F-150. Despite being heavily covered in camouflage, you can see that the new Ranger has a similar headlight design. The Super Cab body also includes a sport bar.

How much power does new Ford Ranger have?

The 2022 Ford Ranger will have close ties with the Ford Bronco because it will ride on the updated version of the T6 body-on-frame platform. The updated platform is a little larger and can support hybrid technology.

Therefore, it’s safe to expect the Ranger to carry the same powertrains. But this is purely speculation at the moment. The Bronco has a 2.3-liter turbocharged inline-four with 300 hp and 325 lb-ft of torque. You can upgrade to the 2.7-liter twin-turbocharged V6 with 330 hp and 415 lb-ft of torque. The Ranger may be offered with a seven-speed manual and a 10-speed automatic transmission too.

The current Ford Ranger has a 2.4-liter four-cylinder engine with 270 hp and 310 lb-ft of torque. When properly equipped, it can tow up to 7,500 lbs and carry a payload of up to 1,860 lbs. This is an excellent amount of power, so these figures may not increase.

It’s currently unclear which electric options Ford has planned for the Ranger. It could receive a plug-in hybrid variant before going fully electric. Also, the Ford Ranger Raptor may be the only option available with the twin-turbo V6.

How much does the 2022 Ford Ranger cost?

The 2022 Ford Ranger is expected to begin at around $26,000. This would be for the base model with two-wheel drive. According to Kelley Blue Book, higher trim levels such as the Ranger Raptor could increase the price to about $50,00. The XLT Crew Cab with the FX4 Package could start around $40,000.

Its price will be well worth it, thanks to the exterior and interior upgrades. It’s safe to expect a larger touchscreen with ford’s new Sync 4 infotainment system. The current model offers an 8-inch screen.

There could be a 12.8-inch vertical display near the center console with a 10.25-inch digital cluster display. Rumors suggest that Wireless Apple CarPlay and Android Auto will be available with a layout similar to the Mustang Mach-E’s.

The new Ford Ranger is expected to be available during the first quarter of 2022. So hopefully, we will learn more about its redesign by the end of summer. We will keep you updated as we learn more.

RELATED: 3 Big Reasons the Ford Ranger Is Better Than the Toyota Tacoma

Introduction

This is a newer safer and more compatible guide to upgrade the stereo in your 'Blue Oval Badge' car.

If you car looks like the left side of this picture you are able to upgrade. otherwise you are out of luck!

Here are some of the benefits of upgrading

  • Android Auto navigation on the small screen in the Dash Cluster / Speedo. (potentially car play aswell)
  • Much snappier and more responsive user interface
  • A nicer looking stock blue theme
  • Newest map data for SatNav
  • If you update your firmware (not the same as this guide) you can also get Radio logos and Calm Mode.
  • There are probably others, if you know of any let me know and i will add them here.
Ford Sync 4.4
I AM NOT RESPONSIBLE FOR YOUR ACTIONS. THIS HAS BEEN EXTENSIVELY TESTED BY MANY PEOPLE WITH MANY DIFFERENT CARS WITH NO ISSUES.
IF YOU PROCEED YOU WILL BE UNABLE TO RETURN TO ANYTHING BELOW 3.2 AFTER FOLLOWING THIS PROCEDURE.

Requirements

  • You will need 1 USB drive between 8-32GB, 8GB is fine for non navigation, 32gb is recommended for navigation.
IF YOU ARE BELOW 3.0 OR UPDATING MAPS ONCE YOU HAVE INSERTED THE USB YOU WILL HAVE FORCED YOUR STEREO IN TO “REFORMAT MODE” IT WILL NO LONGER BOOT NORMALLY UNTIL YOU COMPLETE THIS PROCESS!

Syn3 Updater is a is a Windows application created to make the upgrade process of the stereo in your 'Blue Oval Badged' car as simple as possible.

Syn3 Updater will allow you to download the latest version and automatically prepare the USB Drive ready for you to insert into your car. This application prevents user error from wrongly formatted or partitioned USB drives and will ensure the correct update method is used.

Syn3Updater

If you are not on Windows you can still upgrade using the Manual Method but we would highly suggest using Syn3 Updater if you are on Windows.

Getting Started

Ford Sync 4.4 Download

This section of the guide has been moved to our new Wiki

Syn3Updater Documentation

Be sure to read the documentation before asking questions!

Updating (Autoinstall Mode)

If you are currently on 3.2 or above and don’t require a map upgrade you should use this method.

  1. insert the USB drive in to your car and make sure the ignition/engine is on, you should see the following message.
  2. Simply wait for the install to complete, you may see the following message followed by a restart, this is normal and can appear once or twice during the install process.
  3. Eventually you will see the following message and may remove your USB drive.
    (Installation time will vary depending on exactly what packages you are updating)

If you want to get Radio Logos and Calm Screen you may need to upgrade your calibration firmware, please refer to Upgrading the APIM Calibration Firmware.

Updating (Reformat Mode)

If you are currently on 3.0 or lower and want to update at all you will need to use this method.
If you are currently on any version between 3.2 and 3.4.19274 and wish to update maps you should use this method.

  1. insert the USB drive in to your car and make sure the ignition/engine is on, you should see the following message.
  2. You will see the following message, do not remove the USB at this point, it will restart automatically in a few moments.
  3. Once the car has rebooted it will start the reformat process and will progress through the following screens, depending on the packages used it can take between 10-60 minutes.
  4. Once the install is complete you will see this screen, remove the USB and the system should start if it doesn’t turn the ignition off, open the car door, then close the door and turn the ignition back on.
  5. Once fully booted go to Settings > General > Master Reset, this will clear a lot of bugs and other incorrect information and will be the first thing I tell you to do if you have any issue.

If you want to get Radio Logos and Calm Screen you may need to upgrade your calibration firmware, please refer to Upgrading the APIM Calibration Firmware.

Updating (Downgrade Mode)

If you are currently on any version above 3.4.19274 and wish to update maps you should use this method.

Ford Sync My Ride

  1. insert the USB drive in to your car and make sure the ignition/engine is on, you should see the following message.
  2. After about 5-15 minutes you will see the following message and it will restart.
  3. Once restarted it will continue updating system software.
  4. You will see the following message, do not remove the USB at this point, it will restart automatically in a few moments.
  5. Once the car has rebooted it will start the reformat process and will progress through the following screens, depending on the packages used it can take between 5-80 minutes.
  6. Once the install is complete you will see this screen, remove the USB and the system should start if it doesn’t turn the ignition off, open the car door, then close the door and turn the ignition back on.
  7. Once fully booted go to Settings > General > Master Reset, this will clear a lot of bugs and other incorrect information and will be the first thing i tell you to do if you have any issue.

If you want to get Radio Logos and Calm Screen you may need to upgrade your calibration firmware, please refer to Upgrading the APIM Calibration Firmware.

Upgrade Feedback Form

Once you have updated and tested everything, please be so kind as to give back to this guide by filling in the upgrade feedback survey

Ford Sync Troubleshooting

CyanLabs F Hub

Visit our F Hub to find all the additional information regarding the stereo of your 'Blue Oval Badged' car such as updating calibration, configuring asbuilt etc.

Ford Sync Problems


Contributions

If this guide has been helpful and you would like to support CyanLabs feel free to donate using the button below. This is greatly appreciated but of-course is not required at all, if you use Discord you can also donate by typing “donate” in our server, this will automatically give you the “Supporter” role in Discord